Truck selection guide
F3000 for construction: configuration selection
Compare F3000 6×4 and 8×4 dump columns for construction-material transport, with particular attention to wheelbase options and site access.
These are public manufacturer option columns, not individual vehicles, stock offers or confirmed combinations. An engine list, power range and wheelbase list in one column must not be combined into an invented specification.
Compare the published configuration columns
The selected columns expose relevant differences. Read the operating-duty notes below before treating any column as a candidate.
| Parameter | 6×4 · GVW 50 t Dump truck | 8×4 · GVW 70 t Dump truck |
|---|---|---|
| Drive type | 6×4 | 8×4 |
| Engine model | WP10/WP12/M10/ISM11 | WP10/WP12/M10/ISM11 |
| Engine power | 336/340/375/380/385/400/420/430 hp | 336/340/375/380/385/400/420/430 hp |
| Transmission options | MT(10/12) | MT(10/12) |
| Emission standard | EURO II-EURO V | EURO II-EURO V |
| Gross vehicle weight | 50 t | 70 t |
| Wheelbase | 3775+1400 mm | 1800+3575+1400/1800+3775+1400/1800+4975+1400 mm |
| Frame cross-section | 850×300(8+7) mm | 850×300(8+7) mm |
| Rear axle ratio | 5.262/5.92 | 4.769/5.262 |
| Fuel tank options | 400L aluminum alloy/380L Iron | 400L aluminum alloy/380L Iron |
| Tire size | 12.00R20/12.00R24 | 12.00R20/12.00R24 |
| Road conditions | Muddy and potholed roads with steep grades | Muddy and potholed roads with steep grades |
| Recommended use | Not listed in this column; confirm | Not listed in this column; confirm |
GVW and GCW identify the manufacturer's vehicle or combination weight columns. They are not payload figures, an allowable road load or a registration approval for your destination.
These columns do not establish a complete body specification, body volume or verified net payload. Confirm body dimensions, volume, installation weight and the resulting axle loads for the actual order.
Technical values retain the source wording and units. Slash-separated entries are options; hp and PS are not interchanged. A blank field does not mean a feature is absent.
What changes the selection
- The 6×4 column lists 3775+1400 mm; the 8×4 column lists three wheelbase options. The selected wheelbase must be checked against the body and actual access layout.
- Both columns list the same 336/340/375/380/385/400/420/430 hp options and manual transmissions. Drive layout alone does not identify an engine or a complete truck.
Confirm before requesting a quotation
- Send entrance dimensions, turning layout, loading equipment and discharge-area conditions.
- Separate public-road travel from site travel and confirm the complete-vehicle weight and registration documents.
- Confirm body and tipping equipment, final wheelbase and tire choice with the supplier before pricing.
The quotation must identify the exact model, chosen options, body or trailer, destination and supporting compliance documents. Price, availability and delivery time require a separate confirmation.
Document basis
SHACMAN 3000 Series brochure · PDF page(s) 27.
The comparison uses whole columns from this manufacturer brochure. Page numbers refer to the PDF file. This document does not establish our sale inventory, brand authorization or customer deliveries.
Explore F3000 specifications ↗
Other series to compare for this application
X3000
Use two X3000 dump references to distinguish rough-site operation from mostly paved construction transport before choosing the chassis and body.
Read selection guideX5000
Start with the X5000 6×4 column for urban construction-waste transport and compare the 8×4 mining column only to understand the change in duty and equipment.
Read selection guideSend the operating brief with your enquiry
Include the route, load description, body or trailer requirements and destination so the proposed specification can be checked.
SHACMAN DUMP TRUCK