Truck selection guide
X5000 for mining: configuration selection
Compare two X5000 8×4 dump reference columns explicitly described for mining-engineering transport; their engines, power and transmissions are materially different.
These are public manufacturer option columns, not individual vehicles, stock offers or confirmed combinations. An engine list, power range and wheelbase list in one column must not be combined into an invented specification.
Compare the published configuration columns
The selected columns expose relevant differences. Read the operating-duty notes below before treating any column as a candidate.
| Parameter | 8×4 · GVW 70 t Dump truck | 8×4 · GVW 90 t Dump truck |
|---|---|---|
| Drive type | 8×4 | 8×4 |
| Engine model | WP10/WP12/M10/M13/X12 | WP13/M13 |
| Engine power | 400-520 hp | 550/560 hp |
| Transmission options | MT(10/12)/AMT(13) | MT(12) |
| Emission standard | EURO II-EURO VI | EURO V |
| Gross vehicle weight | 70 t | 90 t |
| Rear axle | 16t | 16t |
| Rear axle ratio | 5.262 | 5.262 |
| Frame cross-section | 850×300(8+7) mm | 850×320(8+7+8) mm |
| Wheelbase | Not listed in this column; confirm | Not listed in this column; confirm |
| Tire size | 315/80R22.5/12.00R20/12.00R24 | 315/80R22.5/12.00R20/12.00R24 |
| Road conditions | Not listed in this column; confirm | Not listed in this column; confirm |
| Recommended use | Medium and short distance heavy-duty load mining engineering transportation | Medium and short distance heavy-duty load mining engineering transportation |
GVW and GCW identify the manufacturer's vehicle or combination weight columns. They are not payload figures, an allowable road load or a registration approval for your destination.
These columns do not establish a complete body specification, body volume or verified net payload. Confirm body dimensions, volume, installation weight and the resulting axle loads for the actual order.
Technical values retain the source wording and units. Slash-separated entries are options; hp and PS are not interchanged. A blank field does not mean a feature is absent.
What changes the selection
- One column lists WP10/WP12/M10/M13/X12, 400–520 hp and MT(10/12)/AMT(13). The other lists WP13/M13, 550/560 hp and MT(12). These are not interchangeable equipment lists.
- The columns list 850×300(8+7) mm and 850×320(8+7+8) mm frames. Both show an axle ratio of 5.262; neither selected column supplies a wheelbase in the display dataset.
Confirm before requesting a quotation
- Provide mine-road grades, haul length, material properties and unloading conditions.
- Obtain the missing wheelbase and body-interface drawing for the exact proposed chassis.
- Confirm engine/transmission matching, axle loads, tires and braking assessment as one vehicle specification.
The quotation must identify the exact model, chosen options, body or trailer, destination and supporting compliance documents. Price, availability and delivery time require a separate confirmation.
Document basis
SHACMAN X5000 brochure · PDF page(s) 15.
The comparison uses whole columns from this manufacturer brochure. Page numbers refer to the PDF file. This document does not establish our sale inventory, brand authorization or customer deliveries.
Explore X5000 specifications ↗
Other series to compare for this application
F3000
Compare F3000 6×4 and 8×4 dump reference columns for a mining enquiry, focusing on axle ratio, frame and wheelbase rather than assuming a payload from the weight label.
Read selection guideX3000
Compare X3000 dump columns for a mining brief: 6×4 and 8×4 references differ in power ranges, axle ratio, frame and fuel-tank options.
Read selection guideSend the operating brief with your enquiry
Include the route, load description, body or trailer requirements and destination so the proposed specification can be checked.
SHACMAN DUMP TRUCK