Truck selection guide
F3000 for mining: configuration selection
Compare F3000 6×4 and 8×4 dump reference columns for a mining enquiry, focusing on axle ratio, frame and wheelbase rather than assuming a payload from the weight label.
These are public manufacturer option columns, not individual vehicles, stock offers or confirmed combinations. An engine list, power range and wheelbase list in one column must not be combined into an invented specification.
Compare the published configuration columns
The selected columns expose relevant differences. Read the operating-duty notes below before treating any column as a candidate.
| Parameter | 6×4 · GVW 50 t Dump truck | 8×4 · GVW 90 t Dump truck |
|---|---|---|
| Drive type | 6×4 | 8×4 |
| Engine model | WP10/WP12/M10/ISM11 | WP10/WP12/M10/ISM11 |
| Engine power | 336/340/375/380/385/400/420/430 hp | 380/385/400/420/430/460 hp |
| Transmission options | MT(10/12) | MT(10/12) |
| Emission standard | EURO II-EURO V | EURO II-EURO V |
| Gross vehicle weight | 50 t | 90 t |
| Rear axle | 16t double-stage | 16t double-stage |
| Rear axle ratio | 5.262/5.92 | 5.262/4.769 |
| Frame cross-section | 850×300(8+7) mm | 850×320(8+7+8) mm |
| Wheelbase | 3775+1400 mm | 1800+3575+1400/1800+3775+1400/1800+4975+1400 mm |
| Tire size | 12.00R20/12.00R24 | 12.00R20/12.00R24 |
| Road conditions | Muddy and potholed roads with steep grades | Muddy and potholed roads with steep grades |
| Recommended use | Not listed in this column; confirm | Not listed in this column; confirm |
GVW and GCW identify the manufacturer's vehicle or combination weight columns. They are not payload figures, an allowable road load or a registration approval for your destination.
These columns do not establish a complete body specification, body volume or verified net payload. Confirm body dimensions, volume, installation weight and the resulting axle loads for the actual order.
Technical values retain the source wording and units. Slash-separated entries are options; hp and PS are not interchanged. A blank field does not mean a feature is absent.
What changes the selection
- Both selected dump columns describe muddy, potholed roads with steep grades. This supports an operating-condition discussion; the brochure does not certify a particular mine route.
- The 6×4 column lists a 850×300(8+7) mm frame and 5.262/5.92 axle ratios; the 8×4 comparison lists 850×320(8+7+8) mm and 5.262/4.769. Evaluate these as distinct option groups.
Confirm before requesting a quotation
- Provide loaded and empty route profiles, grade lengths, surface conditions and the required braking assessment.
- Confirm body dimensions, material density, unloading conditions and axle-load calculations for the complete vehicle.
- Request the exact engine, transmission, axle ratio, tires and wheelbase on one signed configuration sheet.
The quotation must identify the exact model, chosen options, body or trailer, destination and supporting compliance documents. Price, availability and delivery time require a separate confirmation.
Document basis
SHACMAN 3000 Series brochure · PDF page(s) 27.
The comparison uses whole columns from this manufacturer brochure. Page numbers refer to the PDF file. This document does not establish our sale inventory, brand authorization or customer deliveries.
Explore F3000 specifications ↗
Other series to compare for this application
X3000
Compare X3000 dump columns for a mining brief: 6×4 and 8×4 references differ in power ranges, axle ratio, frame and fuel-tank options.
Read selection guideX5000
Compare two X5000 8×4 dump reference columns explicitly described for mining-engineering transport; their engines, power and transmissions are materially different.
Read selection guideSend the operating brief with your enquiry
Include the route, load description, body or trailer requirements and destination so the proposed specification can be checked.
SHACMAN DUMP TRUCK